Transfer rim pattern to 4mm Okoume
Cut out rim 1/4 " proud all around
Check fit on coaming base
Mask all regions around base
Glue and clamp rim to base
After glue cures, trim off excess
|
|
|
Transfer rim pattern to 4mm Okoume |
Cut out rim 1/4 " proud all around |
Check fit on coaming base |
|
|
|
Mask all regions around base |
Glue and clamp rim to base |
After glue cures, trim off excess |
|
|
|
Shape rim to proper dimensions |
Rim ready for finishing |
|
Back To The Coaming Main Page |